8 Pallet Rack Safety Products You Should Be Using

pallet jack

8 Pallet Rack Safety Products You Should Be Using

Your warehouse is the heart of your operation. But with people and machinery moving in all directions to gather goods and get them to your customers on time, it also can become an unsafe environment.

That’s why attention to detail is essential to a safe and efficient warehouse operation. Here is a list of products that will enhance the safety of your pallet racking system. These products are not costly, but they will go a long way in protecting the people, products, and processes that keep your business running smoothly.

  1. Beam drop pin.

Sometimes a forklift operator accidentally lifts a pallet too high, causing it to hit the rack beam above the load. When this happens, the beam can become disengaged from its columns. Inexpensive and easy to install, beam drop pins prevent this dangerous problem from happening.

  1. Pallet supports.

We’ve all had to tighten our belts a bit these days. If you have found wire mesh decks to be outside your budget, pallet supports are an affordable safety alternative. These devices help increase the structural integrity of the pallet by supporting the bottom and minimizing deflection. Pallet supports can also be a great addition to wire decks, as you can add them underneath the deck to provide additional strength for heavy loads.

  1. Column guards.

Even the most careful forklift drivers sometimes bump into racking. These impacts can significantly damage the column and which impairs the integrity of your pallet rack. Column guards are an easy-to- install and inexpensive way to protect the rack frame from damage. They come in a variety of materials, shapes, and sizes to suit your needs.

  1. End of aisle guards.

Most of the forklift maneuvering in your warehouse happens at the end of the aisles. As you would expect, this area is where most of the rack damage can and does occur. Aisle guards offer added protection to the racks in these critical areas.

  1. Anchors.

Every frame needs to be securely anchored to the concrete floor. As part of your routine warehouse safety inspections, make it a point to check that your anchors are in place and doing their job to keep your employees and inventory safe from harm.

  1. Capacity labels.

Overloading a pallet rack can cause lead to a dangerous collapse. Use clear capacity labels on every beam to show employees exactly how much weight your racking can handle. Be sure to obtain seismic calculations <internal link to https://www.speedrackwest.com/pallet-rack-seismic-calculations/> for your racking so you can be confident knowing an engineer has evaluated the capacity of your rack.

  1. Bollards.

Bollards are short posts used to create a protective barrier between your workers and potential danger. When bolted directly to the floor or ground, bollards help direct forklift traffic and mark boundaries near racking systems, loading areas, pedestrian crossings, and office spaces. We carry bollards in different shapes and sizes to meet your needs.

  1. Netting or straps.

Warehouse netting and straps help keep loose materials from falling out into an aisle or workspace of your warehouse. These products are a wise safety investment, especially if your business handles loose palletized material or small packages.

 

Warehouse safety doesn’t have to be expensive, but it does need to be a top priority. Let us know how we can help you decide what safety products you need to keep your busy warehouse humming along.

No Comments

Post A Comment

Stay updated
Stay updated Be the first to know about blowout specials
and used pallet rack sales.