At the heart of the advanced Radio Shuttle racking system is the Radio Shuttle Car. The low-profile car is designed to conveniently pass underneath pallets.
Pallets are stored on specially designed pallet racking that is outfitted with guide rails and tracks to accommodate the Radio Shuttle Car.
When the car arrives at the desired pallet, a platform raises to support the pallet and elevate it a few inches. The shuttle car then smoothly transports the pallet to the front of the racking system for easily removal of a pallet.
The shuttle car is battery powered, which helps reduce emissions in your warehouse. The storage system comes complete with a battery, charger and remote control.
Maximum Load Capacity: 3,300 lbs
Speed: 5 ft / second (no load), 3 ft / second (with load)
Pallet sizes: Compatible with most common pallet sizes in the USA
Battery: 48V, 30AH
Run Time: At least 8 hours on a single charge
Charge time: 3 hours
Battery Life: 1000 charge cycles
Noise level: < 60db
Additional technical specifications available upon request.
The Radio Shuttle Car is outfitted with numerous sensors to detect pallets and obstacles. When sensors detect an obstruction in the path, the shuttle will come to a stop and sound an alarm to notify users of an issue.
The car also contains resistance sensors. When storing pallets close together, the car will detect when two pallets are touching and gracefully releases the pallet.
The radio shuttle racking system is sometimes compared to a drive in / drive thru racking system because it allows a similar storage density. However, the radio shuttle provides significant advantages over other racking systems.
To retrieve pallets stored in the middle of a drive-in rack system, the forklift operator has to drive down a very long and narrow racking aisle, lift the pallet, and then reverse back out of the long and narrow racking aisle.
Have you ever seem what happens when a forklift operator makes a mistake and accidentally bumps into pallet rack? The whole warehouse can fall down, and people can get seriously injured or die.
Forklift operators can make simple mistakes like that even with normal aisles. The risk of an incident goes up as they drive deeper into the racking system.
The risk is further increased because the place where a user is most likely to make a mistake is when they are deep inside the racking system. This puts the operator at even greater risk if an accident were to happen – they would buried deep inside a collapsed rack system.
With the Radio Shuttle System, these risks are greatly reduced.
The Radio Shuttle System provides significant efficiency gains.
Forklifts only need to come to the correct bay. The radio shuttle car then retrieves the pallet and brings it to the front of the rack where it is easily loaded by the forklift. The forklift saves time and fuel by not having to drive down a deep rack aisle.
While the forklift removes one pallet (ie, for loading on a truck), the shuttle car can go to retrieve the next pallet and bring it to the edge of the rack system. This makes it much quicker to unload a bay of pallets using the Radio Shuttle System.
Contact us to request a quote on a Radio Shuttle System.