Can You Walk or Work Under Pallet Racking? What OSHA and RMI Say

People can walk and work under pallet racking only when the rack is sound, within capacity and guarded. Here is what OSHA and RMI say, when it’s never safe, and how to guard a walkway or tunnel bay.

  • 0
  • 9
  • 0
  • 9

CONTENTS

    Not Sure How This Applies to Your Business?

    icon blcok
    503-640-5666

    or

    Yes, people can walk and work under pallet racking, but only where the rack is undamaged, loaded within its rated capacity, and set up so nothing above them can fall. OSHA requires stored material to be secure against sliding or collapse, bars anyone from standing under a raised forklift load, and requires hard hats where falling objects are a risk. RMI recommends overhead decking or guarding in every tunnel bay.

    Key Takeaways

    • Walking under pallet racking is allowed when the rack is sound, within capacity and guarded against falling product. 
    • OSHA never allows anyone to stand or pass under a raised forklift load, loaded or empty. 
    • Tunnel bays and walkways under racking need overhead decking or guarding, per RMI. 
    • Never walk or stand on wire mesh decking. RMI says it isn’t built to be a walking surface. 
    • Netting, back guard panels, guard rails and inspections make shared space under racks safe. 

    Someone sets up a desk under the first beam level. Then a fridge shows up, and a microwave. Above it sit loaded pallets, and the back of the rack faces the desk with no net and no backstop. People in that seat are right to ask whether anyone can walk under pallet racking, let alone work there all day.

    The same question comes up with tunnel bays: openings at floor level that let people and forklifts cut through a row instead of going around it. According to RMI’s tunnel bay guidance, they’re also one of the only places where people pass directly beneath loaded rack.

    This guide covers the four OSHA rules that apply under your racks, the situations where it’s never safe, and the guarding that makes a walkway or tunnel safe. If people already work under your racks, it ends with a checklist you can take to your manager. A pallet rack safety inspection is the fastest way to know where you stand.

    Wire mesh back guard panels on loaded pallet racking keep products from falling into the walkway

    Can you walk under pallet racking?

    Yes, with conditions. You can walk under pallet racking when three things are true: the rack is undamaged and loaded within its posted capacity, nothing stored above can slide or fall into the path, and no forklift is placing or pulling a load over your head.

    Safe to pass underNot safe to pass under
    Undamaged uprights and beams, capacity label postedBent uprights, cracked welds, missing beam locks
    Decking or guarding on the level above the pathOpen beams with loose or broken pallets above
    Back guard or netting on the side facing peopleBack of a single row open to the walkway
    No forklift working the bays overheadA forklift lifting or placing a load above

    What does OSHA say about working under pallet racking?

    No OSHA standard bans walking under racks by name, and none approves it by name either. That’s why one person says “there’s no rule against it” and the next says “it was never allowed.” OSHA applies four general rules to the space under and around your racks. For the full picture of rack rules, see our guide to pallet racking requirements.

    Does stored material have to be secured?

    Yes. OSHA 1910.176(b) says storage of material “shall not create a hazard,” and material stored in tiers must be stable and secure against sliding or collapse. A loose pallet over a walkway fails that test.

    Can anyone stand under a forklift load?

    No. OSHA 1910.178(m)(2) says no person may stand or pass under the elevated portion of any truck, whether it’s loaded or empty. When a forklift is working the bay above a walkway, that walkway has to be clear.

    Do workers under racks need hard hats?

    Where objects can fall, yes. OSHA 1910.135(a)(1) requires a protective helmet for each employee working where there’s a potential for head injury from falling objects.

    What about hazards no rule names?

    The General Duty Clause, Section 5(a)(1) of the OSH Act, requires a workplace free from recognized hazards likely to cause death or serious harm. It’s the same clause OSHA uses to cite racks that aren’t bolted to the floor.

    When is it never safe to be under a pallet rack?

    • While a forklift is lifting or placing a load above you. OSHA 1910.178(m)(2) has no exceptions. 
    • Under or next to a damaged bay. Bent uprights, cracked welds and missing beam locks are all signs of pallet rack damage that need to be fixed before anyone is under that bay. 
    • Under bays with no capacity label, or loaded past it. Without capacity labels, nobody on the floor knows the limit. 
    • Behind a single row with nothing on the back. A load pushed too far goes straight into the walkway. 
    • Under open beams holding loose or broken pallets. Without decking, damaged pallets and loose product can fall through.

    Can you put a desk, workstation or break area under pallet racking?

    It isn’t banned, but it’s the hardest setup to make safe. A desk or break area exposes people for hours, not seconds.

    RMI’s guidance on rack nets and panels names pedestrian walkways, work cells and areas above dock doors as spots where the risk of injury from falling product is exceptionally high.

    If a seated workstation can move out from under stored loads, move it. If it can’t, guard it like a tunnel: decking or guarding on the level above, a back guard or netting on any side facing an aisle, and hard hats where objects can fall.

    How do you make a pedestrian path or tunnel bay under racking safe?

    Tunnel bays keep pallet positions above the crossing. That storage is why the guarding has to be right.

    What goes over the path?

    RMI recommends decking or other guarding against falling objects on the bottom shelf of every tunnel bay. In its tunnel bay guidance, Jonathan Hirst of NASECO, an RMI member company, put it plainly: if a facility stores product above the tunnel, that protection isn’t optional. Solid steel decking gives full overhead cover; wire mesh decking stops anything larger than its mesh openings.

    Why is the back side of a single row the riskiest spot?

    A back-to-back row has another rack behind it. A single row often backs onto a walkway, work cell or office wall, and RMI names that setup as a good candidate for containment guarding. Wire mesh back guard panels or pallet rack safety netting stop loads from leaving the back of the rack.

    Should the bay over a walkway hold product at all?

    You have two choices. Keep the storage and guard it fully, or make the bay a no-storage location: beams and decking stay in place, nothing gets stored above the path.

    What keeps forklifts out of the path?

    RMI recommends floor-mounted guardrail or bollards at tunnel entries and painted walkways to separate people from fork trucks. OSHA 1910.176(a) also requires permanent aisles and passageways to be marked.

    HazardProtectionWhat it does
    Product falling from aboveSolid steel decking on the level over the pathOverhead cover for people below
    Loads pushed out the backBack guard panelsSteel mesh stop on the side facing people
    Cartons and loose items fallingFixed, sliding or modular nettingCatches smaller items that slip off a pallet
    Forklift strikes at tunnel entriesGuard rails and bollardsDeflect trucks away from uprights and people
    Trucks and people in the same spacePainted walkways, marked passagesSeparates foot traffic from fork trucks

    What should you do if people already work under your racks?

    1. Look at the rack above the area for damage and a posted capacity label. 
    2. Check the side facing people for a backstop or netting. 
    3. Check that loads above are stable, not loose or hanging over the beam. 
    4. Mark the path, and keep forklifts from working overhead while people are below. 
    5. Move desks and break areas out from under stored loads where you can. 
    6. Book an inspection so someone qualified looks at the whole system. 

    Can you walk on pallet racking or wire decking?

    No. RMI says wire mesh decking is not engineered for pedestrian use. Its capacity rating assumes a load spread evenly over the deck, and a person’s foot is a point load that can make the deck buckle and fall through the beams. The gaps in the mesh are also a trip hazard.

    Pallet Racking Walkway FAQs

    Does OSHA allow pedestrian walkways under pallet racking?

    Yes. OSHA has no rule that bans them. The walkway still has to meet 1910.176(b), 1910.178(m)(2), 1910.135 and the General Duty Clause, the same clause OSHA uses when it cites racks that aren’t bolted down.

    Do you need decking above a rack tunnel?

    Yes. RMI recommends decking or other guarding on the bottom shelf of every tunnel bay, because it’s one of the only places where people and equipment pass directly beneath loaded rack.

    Do you need a hard hat to walk under pallet racking?

    Where there’s a potential for head injury from falling objects, yes. OSHA 1910.135(a)(1) requires employers to make sure each affected employee wears a protective helmet in those areas.

    How much clearance do you need below sprinklers?

    OSHA 1910.159(c)(10) sets a minimum vertical clearance of 18 inches between sprinklers and the material below, for sprinkler systems installed to meet an OSHA standard.

    Keep people under your racks safe

    People can walk and work under pallet racking when the rack is sound, within capacity and guarded on every side that faces them. Nobody stands under a raised forklift load, ever. And the risks under a rack are easy to miss from the floor, so an inspection finds them first.

    Book a rack safety inspection to get the area checked, or call us at 503-640-5666 to spec netting, back guards or tunnel guarding for your layout.

    Was this helpful?

    Contents

      Need a free consultation?

      icon blcok
      503-640-5666

      or

      Have any
      more questions?

      Call us

      Subscribe

      to our newsletter

      be informed

      about offers & solutions