Heavy-Duty Pallet Racking in Spokane & The Inland Northwest, WA

Seismic Design Category::

Eastern Washington carries a lower seismic hazard than the Puget Sound region, but Washington State Building Code (WAC 51-50) adopts IBC 2021 and ASCE 7-16 statewide. Engineered anchorage is still required, the code has no Eastern Washington carve-out. Every Spokane installation is designed to the site-specific seismic parameters for that address.

Engineering::

Every Spokane installation includes stamped seismic anchorage calculations, base plates, anchor bolt specs, and concrete embedment designed to the site-specific load. The building department sees real numbers tied to your slab and soil conditions, not generic specs pulled from a catalog.

High-Piled Combustible Storage: :

Anything stacked over 12 feet typically triggers a high-piled storage permit, from Spokane Fire Department within city limits, or the Spokane County Fire Marshal for unincorporated sites. This is the most common fire-related permit for warehouse racking, and the one that most often catches operators off guard mid-project.

Sprinkler Coordination::

Racking cannot interfere with sprinkler coverage. If new racks change ceiling-to-pile heights, sprinkler design usually needs adjustment too. We prepare the commodity classification per NFPA 13 and coordinate directly with your sprinkler designer and the fire marshal so both packages clear together.

Load Capacity::

Every rack we install gets a capacity label rated to the actual configuration. The label tells your team and the inspector exactly what each level can hold.

Anchoring::

Slab anchorage is critical for any Spokane installation. We calculate anchorage specific to your concrete thickness, slab condition, and site soil class, then torque-test every anchor before turnover.

General Duty Clause::

OSHA Section 5(a)(1) requires employers to provide a workplace free from recognized hazards. Pallet rack violations are among the most common citations during industrial inspections, and financial penalties adjust annually for inflation. A documented, engineered system is the cleanest defense.

Ongoing Compliance::

We provide capacity labeling, safe-access design, and a maintenance handoff at the end of every install so your team knows what to inspect monthly and what to escalate. Recurring safety inspections are available as a service when you want a documented compliance trail.

Pre-Install Engineering Review::

Before any steel ships, our team audits your order against your site dimensions, forklift class, and pallet specs. We’ve caught customer measurement errors worth $1,000+ before they ever left our yard.

Post-Install Verification::

Once installed, the system is load-tested and labeled. The City of Spokane DSC or Spokane County Building conducts the final compliance inspection, we provide the documentation they need (stamped drawings, anchor torque records, capacity certifications) so the inspection passes the first review.

Zoning Compliance::

Spokane’s industrial and commercial zones generally permit warehouse racking without variance. Installations that change building occupancy classification, adding mezzanine floor area, or shifting an S-2 warehouse toward S-1 high-hazard storage, can trigger reclassification and require additional review.

Site-Specific Checks::

Agricultural-to-industrial conversion sites are increasingly common along the Eastern Washington logistics corridor. If your facility sits in a zone that has recently transitioned, we flag any classification ambiguity early and route the submittal through the right reviewer before work begins.